Products Manufacturers & Suppliers - China Products Factory

DAF360 Series Residual Current Circuit Breakers

The DAF360 electronic residual current circuit breaker has been designed and manufactured in accordance with the latest IEC61008-1 standards and complies with the EN50022 standards for modular switches. They can be used to load standard guide rails with “hat shape” symmetrical structures.

inquiry detail
DAL1-63 Residual Current Circuit Breakers

Introduction DAL1-63 residual current circuit breakers are protection equipment which must be used to protect human life against dangerous electric shocks or prevent the fires arising out of isolation mistakes thereby detecting isolation mistakes to occur within the plant in advance. Sigma residual current circuit breakers are produced with 2 and 4 poles in accordance with IEC EN 61008-1 standard and in compliance with CE norms under ISO 9001:2008 quality assurance system. What is the differe...

inquiry detail
DABL-63 RCBO 6KA Residual Current Operated Circuit Breaker

Residual current operated circuit breakers with overcurrent protectionDABL-40are intended for electric shock hazard protection in case of electric installation insulation failures, for preventing fires caused by earth current leakages, overload and short circuit protection.
They are recommended for protecting group lines supplying outdoor installation receptacles, appliances and garage and basement lighting.

inquiry detail
DABL-63 Nova Series Residual Current Operated Circuit Breakers With Overcurrent Protection

Residual current operated circuit breakers with overcurrent protectionDABL-40are intended for electric shock hazard protection in case of electric installation insulation failures, for preventing fires caused by earth current leakages, overload and short circuit protection.
They are recommended for protecting group lines supplying outdoor installation receptacles, appliances and garage and basement lighting.

inquiry detail
DAB7LN-40 series DPN Residual Current Operation Circuit Breaker(RCBO)

DAB7LN -40 residual current circuit breakers are small devices designed with high breaking capacity (6kA) and they are suitable for the disconnection of neutral lines.The circuit breakers are widely used in AC50H low-voltage electrical systems with a rated voltage of 230V and rated current of no more than 40A. This effectively protects people from electric shock and circuit equipment form overcurrent or short circuiting.These circuit breakers are also suitable for preventing fire hazards as a result of ground currents caused by insulation damage of electrical equipment.

inquiry detail
RCBO 4.5KA Residual Current Circuit Breaker With Overcurrent Protection

Introduction Residual current operated circuit breakers with overcurrent protection ABDT-63 are intended for electric shock hazard protection in case of electric installation insulation failures, for preventing fires caused by earth current leakages, overload and short circuit protection. They are recommended for protecting group lines supplying outdoor installation receptacles, appliances and garage and basement lighting.

inquiry detail
MCB Under Voltage Release

Under voltage release
The rated voltage is 230V and 400V respectively. The release will break the circuit breaker when the actual voltage is between 70%Ue-35%Ue; the release will prevent the circuit breaker from closing when the actual voltage is below 35%Ue; the release will close the circuit breaker when the actual voltage is between 85%Ue-110%Ue.

inquiry detail
MCB Shunt Release

Shunt release
Rated control source voltage(Us)of DAB7-FL shunt release is AC50Hz and 24V to 110V, 110V to 400V,DC 24V to 60V, 110V to 220V, when the applied current voltage is from 70% Us to 110% Us, the shunt release will act reliably and break the circuit breaker.

inquiry detail
DAM10 Molded Case Circuit Breaker NSX250

DAM10(NS) series plastic outer covering type circuit breaker is this company uses one of international vanguard technology development new circuit breakers, its fixed insulation voltage is 750V, is suitable in exchanges 50Hz or (60Hz), fixed working voltage 690V and below, fixed operating current 12.5A to in the 630A, electric current, use for to assign the electrical energy, in normal condition mean infrequent closed and using of the separation, and overloads, owes the voltage the protective function when the line and the equipment. Fixed shell rank
electric current in 400A and following circuit breaker, also may do is the cage electric motor to start not frequently, the revolution interrupts as well as overloads in the electric motor, the short circuit and owes when the voltage protective function. The product conforms to IEC60947-2 standard.

inquiry detail
C45 4P Miniature Circuit Breaker

Application C45 is applicable to a line of AC 50Hz/60Hz, 230V in single pole, 400V in double, three,four poles for protecting overload and short circuit, and rated current up to 63A. It can also beused for infrequent line conversion under the normal condition.The breaker is applicable tolighting distribution system in industrial enterprise, commercially district, high-rise building anddwelling house. It conforms with the standards of IEC60898. Main Technical Parameter Type C45 Pole 1...

inquiry detail
C45 3P Miniature Circuit Breaker

Application C45 is applicable to a line of AC 50Hz/60Hz, 230V in single pole, 400V in double, three,four poles for protecting overload and short circuit, and rated current up to 63A. It can also beused for infrequent line conversion under the normal condition.The breaker is applicable tolighting distribution system in industrial enterprise, commercially district, high-rise building anddwelling house. It conforms with the standards of IEC60898. Main Technical Parameter Type C45 Pole 1P...

inquiry detail
C45 2P Miniature Circuit Breaker

Application C45 is applicable to a line of AC 50Hz/60Hz, 230V in single pole, 400V in double, three,four poles for protecting overload and short circuit, and rated current up to 63A. It can also beused for infrequent line conversion under the normal condition.The breaker is applicable tolighting distribution system in industrial enterprise, commercially district, high-rise building anddwelling house. It conforms with the standards of IEC60898. Main Technical Parameter Type C45 Pole 1P 2P...

inquiry detail