English

product

  • DAA Air Circuit Breaker

    DAA Air Circuit Breaker

    DAA series Low Voltage Air circuit breaker air circuit breaker is suitable for the circuit of AC 50Hz/60Hz with rated service voltage 400V, 690V and rated service current up to 6300A.It is mainly used to distribute electric energy and protect circuits and electric equipment against over-load, under-voltage, short-circuit and single-phase earthing fault.
    inquirydetail
  • HVS MCB circuit breaker

    HVS MCB circuit breaker

    BASIC FEATURES
    Rating 50 A
    Execution (pole) Single Pole (SP)
    Type C Curve
    inquirydetail
  • DAB5 series Miniature Circuit breaker(MCB)

    DAB5 series Miniature Circuit breaker(MCB)

    >> Introduction DAB5-63  are intended for protecting distribution and group systems having different loads: - electric appliances, lighting – V characteristic switches; - drives with moderate starting currents (compressor, fan group) – C characteristic switches; - drives with high starting currents (hoisting mechanisms, pumps) – D characteristic switches; Miniature circuit breaker DAB5-63 are recommended for use in electrical distribution panels of residential and public bui...
    inquirydetail
  • Micro changeover switch

    Micro changeover switch

    l. Applicable range SF series DIN-rail installation micro change-over switch is a kind of switch apparatus applicabl to the hybrid resistance and impedance circuit with AC 50Hz or 60Hz, rated voltage below 230-400V andrated current16A-125A, allowing for 2 power sources or load conversion,realizing the functions of circuit conversion andswitch disconnection. It can be used for the changeover of power supply of electrical equipments,changeover of positiveand reverse running of motor, measuremen...
    inquirydetail
  • DAB7N-40 series DPN Miniature Circuit breaker(MCB)

    DAB7N-40 series DPN Miniature Circuit breaker(MCB)

    >> Introduction DAB7N-40 Series miniature circuit breaker adopts double-break point of 1P+N,the two poles are insulated and isolated from each other,under synchronous operation,N-pole always will make first and break later, which guarantees electric arc breaking capacity of protected pole, also ensures safety of controlled circuits and electric equipment. >> Advantages ·  Two types of overcurrent protection – thermal and electromagnetic. ·  Independent contact position indicator. ...
    inquirydetail
  • DAB7LN-40 series DPN Residual current operation circuit breaker(RCBO)

    DAB7LN-40 series DPN Residual current operation circuit breaker(RCBO)

    >> Introduction DAB7LN -40 residual current circuit breakers are small devices designed with high breaking capacity (6kA) and they are suitable for the disconnection of neutral lines. The circuit breakers are widely used in AC50H low-voltage electrical systems with a rated voltage of 230V and rated current of no more than 40A. This effectively protects people from electric shock and circuit equipment form overcurrent or short circuiting. These circuit breakers are also suitable for prev...
    inquirydetail
  • DAM11 Series Moulded-case Circuit Breaker

    DAM11 Series Moulded-case Circuit Breaker

    DAM11, DAM11LY, DAM11RT, DAM11E and DAM11EY series of circuit breakers are new upgraded circuit breakers researched and developed by the company combined with the advantages of similar international products and demand of domestic and international markets.
    inquirydetail
  • DAM1-125 Series Thermal Overload Operation Moulded Case Circuit Breaker(Fixed type)

    DAM1-125 Series Thermal Overload Operation Moulded Case Circuit Breaker(Fixed type)

    The DAM1 series circuit breakers are intended for conducting current in normal mode and switching it off at short circuits, overload, inadmissible bucking as well as operational actuation and tripping of electric circuit parts. They are designed for use in electric units having the operative voltage limited to 400V per rated current from 12,5 to 1600A.
    They correspond to the requirements of EN 60947-1, EN 60947-2
    inquirydetail
  • DAM1-160 MCCB Moulded Case Circuit Breaker

    DAM1-160 MCCB Moulded Case Circuit Breaker

    The DAM1 series circuit breakers are intended for conducting current in normal mode and switching it off at short circuits, overload, inadmissible bucking as well as operational actuation and tripping of electric circuit parts. They are designed for use in electric units having the operative voltage limited to 400V per rated current from 12,5 to 1600A.
    They correspond to the requirements of EN 60947-1, EN 60947-2
    inquirydetail
  • DAM1-250 MCCB Moulded Case Circuit Breaker

    DAM1-250 MCCB Moulded Case Circuit Breaker

    The DAM1 series circuit breakers are intended for conducting current in normal mode and switching it off at short circuits, overload, inadmissible bucking as well as operational actuation and tripping of electric circuit parts. They are designed for use in electric units having the operative voltage limited to 400V per rated current from 12,5 to 1600A.
    They correspond to the requirements of EN 60947-1, EN 60947-2 .
    inquirydetail
  • DAM1 630 Series Moulded Case Circuit Breaker

    DAM1 630 Series Moulded Case Circuit Breaker

    The DAM1 series circuit breakers are intended for conducting current in normal mode and switching it off at short circuits, overload, inadmissible bucking as well as operational actuation and tripping of electric circuit parts. They are designed for use in electric units having the operative voltage limited to 400V per rated current from 12,5 to 1600A.
    They correspond to the requirements of EN 60947-1, EN 60947-2 .
    inquirydetail
  • DAM1 800 MCCB Moulded Case Circuit Breaker

    DAM1 800 MCCB Moulded Case Circuit Breaker

    The DAM1 series circuit breakers are intended for conducting current in normal mode and switching it off at short circuits, overload, inadmissible bucking as well as operational actuation and tripping of electric circuit parts. They are designed for use in electric units having the operative voltage limited to 400V per rated current from 12,5 to 1600A.
    They correspond to the requirements of EN 60947-1, EN 60947-2
    inquirydetail
123456 Next > >> Page 1 / 10
Hit enter to search or ESC to close